0

Your Cart is Empty

How to Make Your Own CBD Shatter

August 31, 2022 5 min read

How to Make Your Own CBD Shatter

How to Make Your Own CBD Shatter

Do you want to make your CBD shatter at home for a full experience when using it? Don't worry; this article teaches you how to make your own CBD shatter in the comfort of your home.

CBD Shatter is the dabbed concentration of CBD made from CBD isolate. When making shatter, the user infuses it with high-quality hemp terpenes from high-end flavor effects. Dissimilar to crumble, CBD shatter doesn't contain other cannabinoids because it is made of CBD isolate or industrial hemp with less than 0.3 percent THC. Therefore, CBD shatter is free from THC; hence you don't have to worry about the intoxicating effects of THC and other cannabinoids. There are many types of CBD shatter, and the one you make depends on your preference. Ready-made CBD shatter is always expensive, so many people look for ways to bypass such procedures. There are many ways to make CBD shatter at home, but butane hash oil is the simplest.

How To Make CBD Shatter Using the Butane Hash Oil Method

The article takes you through all the processes you must take when making CBD shatter using butane solvents extraction. The butane hash oil method is hazardous; hence you must take precautions. Making CBD shatter indoors is not a good idea because you may probably bow your room in pieces. However, the method is safe if you take thorough precautions and focus during the process.

Requirements for Making CBD Shatter

In the first step of making CBG shatter at home, you must gather the following supplies:

  • CBD isolate or hemp strain
  • Extraction tube
  • More than one butane canister
  • Coffee filter
  • Electric range double boiler
  • Stripe of parchment paper
  • Single-edged razor blade or a surgical; scalpel. Pyrex dish for collecting the shatter

Procedure

Grind your hemp and let it rest for some time. This allows it to dry and lose its freshness since it's what will make the best CBD shatter. You should get approximately three-point-five grams of CBD shatter after filling it in the extractor and spraying it with a full canister of butane. However, MacCallum et al. (2020) suggested that the amount of CBD that shatters your produce depends on the quality of the hemp you use. For example, Chan et al. (2020) revealed that some butane hash oil extractors would yield 20 percent of the hemp you used.

Fill the Extractor with the Ground Hemp

Fill the extractor to the brim to carry on with the process of making CBD shatter. You can buy the extractors for head shops, but it's easy to make your own. Ensure the hemp is packed compactly but not too compact. This eliminates unwanted air spaces but allows the butane to infiltrate all the hemp in the tube.

Saturate the Hemp with Butane

The end of your extraction tube should have a small hole, an internal filter, and a cap with some gaps. A coffee filter will work in place of a filter if you use homemade extractors. Buy ready-made extractors from shops that have installed filters. Giroud et al. (2017) advised that you could slowly spray the butane through the hole until you empty the butane canister to make your CBD concentrate. You should notice a thick green, grey, or brown liquid from the pickles at the bottom of the extractors; collect it in a Pyrex container.

The spraying of butane should be done from outside if you want to make the CBD wax without blowing your home. Ensures the place has ventilation and is far from building potential fire sources or ignition such as vehicles. Any remote ignition near you could lead to an explosion, and that's not what you would like to experience.

Evaporate the Butane

This is another step of making CBD shatter, and it's dangerous. Fill the double boiler and place it in a hot electric range heater. It is essential to use an electric heater because using a gas stove will make you vulnerable to an explosion. After setting up the electric double boiler, place the Pyrex container carrying your CBD contents and wait for the liquid to evaporate gradually. The remaining contents make up your CBD shatter after evaporation.

It would help to allow all the butane liquid to evaporate when making CBD shatter. Otherwise, you will have the final product contaminated with butane. Schneberk et al. (2015) revealed that butane is harmful to your lungs, and its explosive nature puts you at risk of significant injuries. You will notice that all the butane has evaporated if the bubbling stops, so you must not worry about it.

Purge the Remaining Butane

Although bubbling has stopped, all the butane used is eliminated. Your Pyrex is left with amber CBD shatter with traces of butane. Therefore, purging is needed to force all the butane away from the CBD shutter for your safety. You can achieve it using a pressurized vacuum pump which you can buy.

The pressurized vacuum pump is used for flushing off all the butane that may have remained in the CBD shatter. This is done using a 3 FCM pressurized vacuum pump. The CBD shatter tainted with butane is placed in the pump chamber, and the traces of butane are sucked out. Ensure you have a gauge o show you the temperature, so you don't burn off the contents. Eliminate almost all the traces of butane after the vacuum process, remaining with delicious CBD shatter.

Scrape and Store

Use your scalpel or one-sided razor to scrape the CBD concentrate from the bottom of the paper. Place it in a clean paper scroll or parchment paper for cooling. You have your CBD shatter and what is left is to consume through dabbing with a rig.

The Bottom Line

CBD shatter doesn't contain other cannabinoids because it is made of CBD isolate or industrial hemp with less than 0.3 percent THC. Therefore, CBD shatter is free from THC; hence you don't have to worry about the intoxicating effects of THC and other cannabinoids. There are many types of CBD shatter, and the one you make depends on your preference. Ready-made CBD shatter is always expensive, so many people look for ways to bypass such procedures. The butane hash oil method is hazardous; hence you must take precautions. Making CBD shatter indoors is not a good idea because you may probably bow your room in pieces. However, the method is safe if you take thorough precautions and focus during the process.

References

Chan, G. C., Hall, W., Freeman, T. P., Ferris, J., Kelly, A. B., & Winstock, A. (2017). User Characteristics And Effect Profile Of Butane Hash Oil: An Extremely High-Potency Cannabis Concentrate. Drug And Alcohol Dependence, 178, 32-38.

Giroud, C., De Cesare, M., Berthet, A., Varlet, V., Concha-Lozano, N., & Favrat, B. (2015). E-Cigarettes: A Review Of New Trends In Cannabis Use. International Journal Of Environmental Research And Public Health, 12(8), 9988-10008.

Maccallum, C. A., Lo, L. A., Pistawka, C. A., & Boivin, M. (2022). A Clinical Framework For Evaluating Cannabis Product Quality And Safety. Cannabis And Cannabinoid Research.

Schneberk, T., Valenzuela, R. G., Sterling, G., & Mallon, W. K. (2015). Prehospital Ramifications Of Butane Hash Oil Synthesis And Use. J Emerg Medical Services.